Home/Products/SWR Pipes & Fittings

Drainage

SWR Pipes & Fittings

Reliable Drainage, Built to Self-Fit.

Tuffon SWR pipes and fittings are built for soil, waste, and rainwater drainage systems that need to perform silently for years: no leaks, no blockages, no callbacks. Manufactured as per IS 13592 and IS 14985, Tuffon’s SWR range covers self-fit and rigid self-fit pipe classes to match the pressure and application needs of any building.

Whether you’re a dealer stocking for builders, a plumber installing a full drainage line, or a homeowner planning a renovation, Tuffon SWR gives you a drainage system that just works.

IS 13592IS 14985Self-fit joints75mm – 110mm3m & 6m lengths
Tuffon SWR pipes and fittings, full product range

Why Tuffon SWR

Five reasons to specify Tuffon.

  1. 01

    Manufactured as per IS 13592 & IS 14985

    Tuffon SWR pipes are manufactured in line with IS 13592 (self-fit SWR pipes) and IS 14985 (rigid PVC pipes for soil, waste, and rainwater), giving you drainage pipework built to recognised Indian Standards.

  2. 02

    Self-Fit Jointing: Faster, Cleaner Installation

    Tuffon's self-fit socket-and-spigot design means faster on-site assembly with secure, leak-resistant joints. No solvent cement curing time needed for the self-fit range.

  3. 03

    Two Rigid Classes for Every Load

    Beyond standard self-fit pipes, Tuffon offers Rigid Self Fit pipes in 2.5 kg/cm² and 4 kg/cm² pressure classes, giving you the flexibility to match pipe strength to the application, from gravity drainage to higher-load soil and waste lines.

  4. 04

    Lightweight, Corrosion-Free

    Unlike cast iron drainage pipes, Tuffon SWR pipes never rust, never scale, and are significantly lighter to handle and transport, making them easier for dealers to stock and plumbers to install.

  5. 05

    Complete System, Not Just Pipes

    From bends and tees to traps and vent cowls, Tuffon's SWR fittings range covers a full drainage system end-to-end, including the extended "Kenton" SKU line for additional fitting types.

Product range

SWR Pipes

Three pipe classes across self-fit and rigid formats, all in 75mm, 90mm, and 110mm.

RangeStandardSizesLengths
SWR Self FitIS 1359275mm, 90mm, 110mm3 metre, 6 metre
Rigid Self Fit (2.5 kg/cm²)IS 1498575mm, 90mm, 110mm3 metre, 6 metre
Rigid Self Fit (4 kg/cm²)IS 1498575mm, 90mm, 110mm3 metre, 6 metre

Complete system

SWR Fittings

A full drainage fittings system including bends, traps, tees and more, for every drainage run.

FittingSizes Available
Bend75mm, 110mm
Shoe Bend75mm, 110mm
Tee75mm, 110mm
Door Tee90mm
Coupler75mm, 90mm, 110mm
N Trap110mm×75mm, 110mm×110mm
Vent Cowl75mm, 110mm
Elbow75mm, 90mm, 110mm
P Trap110mm×110mm
Double Tee75mm, 90mm, 110mm
End Cap75mm, 110mm

Extended range

Additional SKUs: Kenton Range

FittingSize
Y Tee75mm
Y Tee110mm
R Tee110mm×75mm
R Coupler110mm×75mm

Applications

Where Tuffon SWR is used.

Soil and waste drainage in residential buildings
Rainwater drainage and downpipe systems
Multi-storey building vent and stack lines
Bathroom and kitchen waste outlets
Commercial and institutional drainage systems
Builder and contractor drainage installations

How it stacks up

Tuffon SWR vs. traditional drainage pipes.

FeatureTuffon SWRCast Iron (CI) PipesStoneware Pipes
WeightLightweightHeavyHeavy
Corrosion resistanceExcellentRusts over timeExcellent but brittle
Installation speedFast (self-fit joints)Slow (lead/caulked joints)Slow, fragile handling
Leak resistanceHigh (rubber ring joints)ModerateModerate
Handling & transport costLowHighHigh

Common questions

Frequently asked questions.

SWR stands for Soil, Waste and Rainwater. SWR pipe systems are designed to carry soil (from toilets), waste (from sinks and baths), and rainwater from buildings into the drainage system.

Tuffon SWR pipes are manufactured as per IS 13592 (for self-fit SWR pipes) and IS 14985 (for rigid PVC pipes for soil, waste and rainwater), both Bureau of Indian Standards specifications.

Tuffon SWR pipes are available in 75mm, 90mm, and 110mm diameters, in 3-metre and 6-metre lengths, across three classes: SWR Self Fit, Rigid Self Fit (2.5 kg/cm²), and Rigid Self Fit (4 kg/cm²).

Yes. Tuffon SWR pipes are commonly used for soil stacks, vent pipes, and waste lines in multi-storey residential and commercial buildings. The Rigid Self Fit classes (2.5 and 4 kg/cm²) provide additional pressure resistance for taller buildings.

Tuffon SWR pipes are lighter, corrosion-free, and faster to install than cast iron pipes. They never rust or scale, use simple self-fit rubber ring joints instead of lead-caulked joints, and cost significantly less to transport and handle on site.

● Get started

Need SWR Pipes & Fittings for your project?

Talk to our team for specifications, sizes and dealer pricing.

Contact us

Explore more

Other products